Specifications

Guide to Selecting and Using Dymax UV Light-Curing Systems
DYMAX BLUEWAVE
®
LED PRIME UVA
The BlueWave
®
LED Prime UVA high-intensity spot-curing lamp is
designed for rapid curing of various coatings as well as adhesive
bonding of metal, glass, polycarbonate, PVC, PET, and many
other substrates. This simple-to-operate spot lamp emits over
15 W/cm
2
of UV curing intensity and features an intensity
adjustment feature from 0-100%. The BlueWave LED Prime UVA
is compatible with a wide array of lightguide options (see Table 1
on page 11).
The BlueWave LED Prime UVA spot-curing lamp includes an
electronic exposure control circuit that can be actuated by foot
pedal or PLC. A solid-state power supply ensures consistent
operation despite fluctuations in input voltage. Low initial cost,
long-lasting lightguides, and over 20,000-hour LED life makes the
BlueWave LED Prime UVA an extremely economical spot-curing
system. Please refer to Dymax literature Lit267 for more
information on the BlueWave LED Prime UVA spot-curing system.
BlueWave
®
LED Prime UVA Spot-Curing Lamp System
CURING WITH LIGHT EMITTING DIODES (LEDS)
The BlueWave
®
LED Prime UVA spot-curing lamp generates
curing energy using high-intensity LEDs. LEDs offer many
advantages over conventional bulbs including constant intensity,
no required warm-up time, and a life span of over 20,000 hours.
The relatively narrow frequency band produced by LEDs also
generates cooler curing temperatures making this unit ideal for
use with thermally sensitive substrates.
BlueWave
®
LED Prime UVA Spectral Distrubution
U
U
V
V
L
L
I
I
G
G
H
H
T
T
-
-
C
C
U
U
R
R
I
I
N
N
G
G
S
S
P
P
O
O
T
T
-
-
L
L
A
A
M
M
P
P
S
S
Y
Y
S
S
T
T
E
E
M
M
S
S
Page 9
BlueWave
®
LED Prime UVA Spot-Curing Lamp Features
Part Numbers
40321
North American Version, 120V Plug
Lightguide #5720 Included
40322
North American Version, 120V Plug
Lightguide Not Included
40950
Asian Version, Type G Plug
Lightguide Not Included
40960
Unit With No Power Cord
1
Lightguide #5720 Included
Peak Intensity
2
>15 W/cm
2
Intensity
Adjustment
Manual, 0-100%
Lightguides
See Table 1. on page 11
Curing Area
<½” diameter (12.7 mm)
Shutter
Timed and manual modes;
foot pedal or PLC controlled
LED Life
Over 20,000 hours
Power
Requirements
Auto-switching, 100-240 VAC, 47-63 Hz
1
Contains the appropriate power cord for Europe
2
As measured through a 5-mm liquid lightguide with a Dymax ACCU-CAL™ 50
LED radiometer