REFLEX RAIL™ OWNER’s MANUAL w w w . p r o t o p a i n t b a l l .
W A R N I N G IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES W A R N I N G IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES
NOTE: The eye is always activated when you turn the marker on. When servicing your marker: • Make sure a barrel sock is fitted to the REFLEX RAIL™. • Make sure your hopper is removed from the REFLEX RAIL™. • Make sure there are no paintballs in the breech of the REFLEX RAIL™. • Always remove the first stage regulator and relieve all residual gas pressure from the REFLEX RAIL™ before disassembly.
Normal Mode ABS ON (default) 8 w w w . p r o t o p a i n t b a l l . c o m Configuration Mode ABS OFF w w w . p r o t o p a i n t b a l l .
10 w w w . p r o t o p a i n t b a l l . c o m w w w . p r o t o p a i n t b a l l .
1 2 4 3 • Be sure the trigger is not adjusted to the point where it is too sensitive and may cause accidental discharge of the marker. • Removing the trigger spring will cause premature wear on the microswitch, resulting in failure.
When servicing your marker: • Make sure your hopper is removed from the marker. • Make sure there are no paintballs in the breech of the marker. • Always remove the air supply and relieve all gas pressure in the marker before disassembly. • When using the marker in temperatures below 50° Fahrenheit it may be necessary to lube the REFLEX RAIL™ bolt more frequently. 14 w w w . p r o t o p a i n t b a l l . c o m w w w . p r o t o p a i n t b a l l .
5 4 2 1 1 1 6 1 1 1 3 7 4 9 7 8 REFLEX RAIL™ BOLT O-RING LIST 009 16 w w w . p r o t o p a i n t b a l l . c o m 1 2 3 4 5 020 N 70 017 N 70 015 N 70 014 N 70 013 N 70 w w w . p r o t 6 012 N 70 7 009 N 70 8 013x2mm N 90 9 Bolt Front Bumper o p a i n t b a l l .
18 w w w . p r o t o p a i n t b a l l . c o m w w w . p r o t o p a i n t b a l l .
010 BN 70 BOTTOM CAP Swivel 20 w w w . p r o t o p a i n t b a l l . c o m w w 007 UR 90 SEAT HOUSING w . p r o t o p 011 BN 70 013 BN 70 Regulator seat a i n t b a l l BODY .
2 1 4 3 PARTS LIST 5 12 1 Clamping Feed Collar 2 Feed Neck Lever 13 3 Feed Neck 4 Ball Detent 8 5 Eye Pipe 15 6 Hyper3™ 7 7 “ACE” Eye 8 Solenoid 9 Front Frame Screw 6 10 Ultralite Frame 9 11 11 Rear Frame Screw 12 REFLEX RAIL™ Bolt 10 13 REFLEX RAIL™ Body 14 Airport 15 Solenoid screws DYE Precision, Inc. 10637 Scripps Summit Ct. San Diego, CA. 92131 14 DYE Europe Dye House, 7-8 Commerce Way Croydon, Surrey United Kingdom CR0 4XA DYE Germany GmbH Albert Einstein Str.
