OWNER’S MANUAL
CHAMPIONSHIP LEVEL PERFORMANCE INCLUDED WITH YOUR DSR MARKER 2 Piece barrel kit (1) 14” UL Barrel tip (1) .688” UL Barrel back • Allen tool set • 1/4oz slick lube • Parts kit • Barrel sock W W W . D Y E P A I N T B A • Start-up guide • Warranty card • Software upgrade cable L L .
DSR OWNER’S MANUAL WARNING TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES • The DSR marker is not a toy. Misuse may cause serious injury or death. • Please read, understand and follow the directions in the DSR owner’s manual. • Eye protection that is designed specifically for paintball and meets ASTM/CE standards must be worn by user and persons within range. • Recommend 18 years or older to purchase. Persons under 18 must have adult supervision.
QUICK REFERENCE POWER SUPPLY TURNING ON DSR Use a coin, screwdriver, or thumb nail and rotate the locking nut counter-clockwise 180 deg to unlock the battery cover. Once unlocked pull the cover down. Plug a high quality 9volt into the plug and mount the battery into the housing. slide the cover over the battery housing and rotate the locking nut clockwise 180 deg to secure the cover. To power on your DSR marker depress and hold the Joystick, located on the back of the grip frame, for 2 seconds.
METHOD OS (MOS) MOS METHOD OPERATING SYSTEM (MOS) The DSR is powered by DYE’s Method Operating System. The MOS gives the operator unrestricted access to precision tuning, and unsurpassed performance. The 5-way Joystick control and high contrast OLED display screen provide an intuitive user interface. The optimized MOS programing logic ensures lightning fast response time, long battery life, precision tuning, and dual player profiles to store your exact playing specifications.
METHOD OS (MOS) P1 SELECTED PROFILE P1 00 00 BATTERY LEVEL NXL 18 .0 FIRE MODE GAME TIMER RATE OF FIRE PLAY SCREEN You are able to select between 3 play screens depending on what information you wish to display. Option 1 is the default setting, for more play screen options select Play Screen under profile settings. (see page 6 for more info) SELECTED PROFILE BATTERY LEVEL P1 DWELL DWELL SETTING 16 .
METHOD OS (MOS) PROFILE SETTINGS P1 G A M E GAME TIMER Set countdown game timer. (Default 2:30) To operate game timer in play mode press the joystick right to start and stop the game timer, Press and hold the joystick RIGHT for 2 seconds to reset.
METHOD OS (MOS) ABS WAIT TIME Values 10-90 seconds in increments of 5 sec (Factory Default 20) ABS wait time is the time, in seconds, that must expire between shots before the ABS activated. P1 ABS W A I T T I M E P1 SHOT TRACK C0UNT DOWN >0 0 0 0 0 > 06 P1 EYE DELAY Values 01-20 (Factory Default 3) Eye Delay is the amount of time, in milliseconds, that the eyes must read a paintball in the breach before the DSR is allowed to fire. This helps to prevent ball chop in the breach.
METHOD OS (MOS) SOUND (Factory Default ON) Turn the sound off or on for navigation . The game timer alarm cannot be turned off. CONFIG CONFIG OFF S Y S T E M > NO YES ENTER ENTER S O U N D > ON R E S E T RESET SYSTEM At any time you can reset the profile you are in to Factory Default settings. AUTO POWER OFF Values 10 – 60 min (Factory Default 10 min) The board will automatically shut down if the marker is not used for a set period of time. You can adjust the shut off time.
T R A I N I N G METHOD OS (MOS) TRAINING MODES CONFIG The DSR has 2 training drills to help you hone your skills. Access the training mode in the profile selection menu. Scroll LEFT OR RIGHT to reach the Training Mode screen. Press the CENTER of the joystick to select. Scroll LEFT OR RIGHT to select the training mode of your choice. With the Desired Drill screen displayed press the center of the joystick to start the drill. M O D E ENTER P1 DWELL 16 .
SOFTWARE UPGRADE Upgrade Cable U P G R A D E S O F T W A R E • Confirm you wish to upgrade the software. > NO YES • The system will begin to upgrade the software. • This may take several minutes. Periodically DYE will release new updated software for the DSR. The new software will be available on www.dyepaintball.com/dsr, and www.dyepaintball.com TO UPDATE YOUR DSR OPERATING SYSTEM FOLLOW THESE SIMPLE DIRECTIONS. • Save the new operating software to any standard flash drive.
POWER SUPPLY LOW BATTERY When the battery level drops below 30% the LED light will flash Blue. When the low battery alert flashes the battery should be replaced as soon as possible to prevent improper function. POWER SUPPLY Use a coin, screwdriver, or thumb nail and rotate the locking nut counter-clockwise 180 deg to unlock the battery cover. Once unlocked pull the cover down. Plug a high quality 9volt into the plug and mount the battery into the housing.
EDGE1 TRIGGER ADJUSTMENT ADJUSTING YOUR EDGE1 TRIGGER The trigger’s travel and reach angle are fully adjustable so that you can fine-tune the trigger to your preference. You do not need to remove the frame or grip from the gun in order to make an adjustment to the trigger. There are two adjustment screws located on the left side of the Ultralite frame and two more adjustment screws behind the trigger. The two screws on the side of the frame adjust the travel of the trigger.
STICKY GRIP REMOVAL 2. Pull the top of the grip away from the frame and forward to allow the upper rear locking hook to clear the frame. 1. Use a 5/64” Allen wrench to remove the screw located at the top front under the grip. 3. Pull the grip forward and down. 4. In doing so, you will have released the last three locking tabs that are under the molded finger grooves. INSTALL STICKY TOOL-LESS GRIPS • Slide the Sticky grip on to the frame from the rear.
ARC™ BOLT ASSEMBLY AND MAINTENANCE 2 4 3 5 1 ARC™ BOLT OPERATION The ARC Bolt has been designed with reliability in mind. The ARC Bolt features a state-ofthe art design that has been factory tuned to provide the user with trouble-free operation in all environments. The ARC Bolt consists of 7 components: 1 2 3 4 5 6 7 Bolt Bolt Can Bolt Guide Reaction Cage Reaction Rod Reaction Rod Stabilizer ARC Core Spring Energy is supplied to the ARC Bolt through the solenoid outside of the Bolt Can.
ARC™ BOLT ASSEMBLY AND MAINTENANCE ARC BOLT MAINTENANCE Regular ARC Bolt maintenance is vital to the performance of the DSR. If the ARC Bolt is not kept well greased and the O-rings in good shape, the performance of the DSR will be hindered. USE DYE SLICK LUBE TO GREASE THE ARC BOLT AFTER EVERY 4,000 TO 8,000 SHOTS, DEPENDING ON PLAYING CONDITIONS. CHECK CONDITION OF O-RINGS. BE SURE THE DSR BOLT AND REACTION CORE CAN MOVE BACK AND FORTH WITHOUT EXCESSIVE FORCE.
HYPER6™ REGULATOR DISASSEMBLY INSTRUCTIONS NOTE: IT IS IMPORTANT TO KEEP THE SEAT AND PISTON FACE CLEAN OF ALL DIRT AND DEBRIS. CLEAN THE SEAT AND PISTON FACE AND APPLY FRESH GREASE EVERY 6 MONTHS OR 75,000 - 100,000 SHOTS, DEPENDING ON PLAYING CONDITIONS. HYPER6™ REGULATOR DISASSEMBLY INSTRUCTIONS The Hyper6™ assembly is housed in the ASA assembly. A fouled Hyper6™ cartridge can be quickly removed for service.
SHIFTPORT ASA TRUCAM ON/OFF ASA The DSR comes equipped with a the TruCam on/off ASA attached to the bottom of the frame. To turn on the gas supply, rotate the side lever counter clockwise until the internal stop is reached. To turn off the gas supply, rotate the side lever clockwise until the other stop is reached. As you rotate the side lever past the mid point, the residual gas n the marker will vent.
ULTRALITE FRAME & LOCK DOWN MICRO FEED NECK LOCK DOWN MICRO FEED NECK The Lock Down Micro Feedneck is adjustable to fit any standard loader. To adjust the cam locking system, lift the cam lever away from the feed collar, and rotate the lever clockwise to tighten or counterclockwise to loosen the grip on the loader. Once the cam lever is facing in the forward direction, press the cam lever down against the feed collar to secure the loader in the feedneck.
EYE PIPE ANTI CHOP EYES/ BALL DETENTS ANTI CHOP EYES The Anti Chop Eye (ACE) system will help prevent the DSR from chopping paint by preventing the marker from firing until a ball is fully seated in front of the bolt. The eyes use a light beam across the breech. In order for the marker to fire with the eyes turned on, the signal between the two eyes must be broken (a paintball in the breach). After every shot, before the next ball drops in the breech, the eye transmitter and receiver must see each other.
TROUBLE SHOOTING GUIDE AIR LEAKS AIR LEAKING FROM THE BACK OF AIRPORT • Check the O-ring on the Air system. If needed change the O-ring and try again. The O-ring normally used is 015 but some manufacturers might use a different size. Consult the manual of the air system you are using. AIR LEAKING BETWEEN FRAME & AIRPORT • Make sure airport locking screw is tight AIR LEAKING FROM THE HYPER6™ REGULATOR • First locate the position of the leak.
TROUBLE SHOOTING GUIDE TRIGGER BOUNCE / DSR SHOOTING MORE THAN ONE BALL PER PULL IN SEMI-AUTOMATIC MODE • Raise the trigger sensitivity level in the configuration mode. • Check that the trigger is not adjusted too short. oring as well as the 90 durometer -015 (purple) oring at the rear of the reaction rod stabilizer. ERRATIC VELOCITY / DSR WON’T FIRE DSR FIRES BUT BALLS ARE DROPPING OFF OR NOT EVEN COMING OUT OF THE BARREL • Make sure a fresh, name-brand battery is installed.
DSR MENU TREE boot screen play screen profile 1 Enter P1 CONFIG P R O F I L E 00 00 NXL 1 Performance 18 .0 ENTER profile 2 Enter CONFIG SYSTEM CHECK P R O F I L E P1 DWELL 16 .0 P1 P2 P S R E O T P T E I R N T G Y S ENTER game timer P1 G A M E T I M E R > MIN 00 SEC 00 TRIG TOUCH SENCE rate of fire P1 fire mode dwell P1 P1 F I R E D W E L L P1 T T R O I U G C G H E R LEVEL 18 .0 3 BPS R F AO I TFR E E M O D E > 16 .
EXPLODED VIEW 1 3 15 2 PARTS LIST 6 1 Feed Neck Collar 4 2 Feed Neck 5 7 3 Ball Detent Clip 4 Eye Pipe 10 5 DSR Body 12 6 ARC™ Bolt 7 Tool-less Back Cap 9 23 8 Solenoid Body 21 9 Solenoid Sub Manifold 13 8 10 Solenoid pilot 11 TruCam airport 14 12 Eye Wire 13 Hyper6™ 14 Front Frame Mounting Screw 19 22 15 Rear Frame Mounting Screw 16 16 Ultralite Frame 17 20 17 OLED Board Assembly 11 18 Airport Knob 19 Sticky Grip 20 Main PCB Board 21 Reach Trigger 22 Regulator Sleeve 23 Ba
DSR WARRANTY AND LEGAL INFORMATION WARRANTY DYE Precision, Inc. warrants for one year to the initial retail purchaser, from the initial date of purchase, that the paintball marker and regulator are free from defects in materials and workmanship, subject to the requirements, disclaimers and limitations of this warranty. Disposable parts, normal maintenance and standard wear and tear parts such as batteries, O-rings and seals are not warrantied.
