User's Manual
DYE Precision, Inc. warrants for one year to the initial retail purchaser, from
the initial date of purchase, that the e.VOKE is free from defects in materials
and workmanship, subject to the requirements, disclaimers and limitations
of this warranty. Disposable parts, normal maintenance and standard wear
and tear parts such as batteries, O-rings and seals are not warrantied.
This warranty does not cover scratches, nicks, improper disassembly,
improper re-assembly, misuse, neglect or improper storage. Modification
to the product will void the warranty. This warranty is limited to repair or
replacement of defective parts with the customer to pay shipping costs.
Warranty card and proof of purchase must be submitted to DYE Precision
for warranty to be in effect. This warranty is not transferable. This warranty
does not cover performance. Paintball markers are non-refundable.
TECHNICAL SUPPORT
Our Technical Support Departments are open Monday through Friday. DYE
Precision, Inc. can be reached at 858-536-5183 ext.0 from 8am to 5pm PST.
DYE Europe can be reached at +44 (0) 20-8649-6330 from 9am to 5pm GMT.
DYE Asia can be reached at 886 (0) 4-2407-9135 from 9am to 5pm GMT +8
hours. Additional support and international contacts are available through
our web site, www.dyepaintball.com
DISCLAIMER
The specifications & photographs in this material are for information and
general guidance purposes only. Our products are continually updated
and changes may be made to specification, design or appearance from
time to time. These are subject to change without notice. Contents of box
may therefore vary from owner’s manual. For details of changes in design,
specification or appearance consult your local distributor or dealer.
e.VOKE, M2, i5, M2 Air Sync, MOSAir , DYEnamic technology Series, and
CFC are registered trademarks. Design rights, copyrights and all other
rights reserved. All patterns, drawings, photographs, instructions or
manuals remain the intellectual property of the manufacturer.
Copyright © 2017 DYE Precision, Inc. The stylized “dye” logo, “sphere” logo,
“e.VOKE” logo, and “M2” logo are either registered trademarks, trademarks, or design
trademarks of DYE Precision, Inc.
DYE Precision, Inc. U.S. Patent AND INT’L PATENTS PENDING. All rights will be strictly
enforced. For a complete list of patents visit www.dyeprecision.com/patents
OWNER’S MANUAL
DYE PRECISION, INC.
USA 10637 Scripps Summit Ct.
San Diego, CA 92131
P 858-536-5183 F 858-536-5191
ASIA
No. 253, Guojhong Rd., Dali Dist.
Taichung City 412, Taiwan (R.O.C.)
P +886 (0) 4-2407-9135
F +886 (0) 4-2407-2090
GERMANY
Albert Einstein Str. 2 B
77656 Offenburg, Germany
P +49 (0) 781 639 349 91
e.VOKE
FCC ID
:2AAZG4015A1
M2 Air Sync Board
FCC ID: 2AAZG3045A1
This device complies with part i5 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference,
including interference that may cause undesired
operation of the device.
WARRANTY
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT
CONTACT INFO
FUTURE PROGRAMING:
The e.VOKE has been designed to be upgradeable as well as allow for
different languages to be uploaded.
CHANGE LANGUAGE:
• Visit www.dyem2.com to download different language packs and
additional info.
• Save the language pack of your choice to a flash drive and using a USB
to Micro USB adapter plug into the e.VOKE charging port.
• Turn your e.VOKE on and the LED light will turn white.
• Tap the front #1 button. The LED light will turn purple. This signifies that
the e.VOKE has found the file and is ready to begin the file transfer.
• Press the center #2 button to start transfer. The LED will flash green and
then begin to flicker purple. It will take up to 10 minutes to complete.
• When update is complete LED will flash green once more and return to
a solid purple.
• The update is complete, you can now un-plug the cable from the e.VOKE.
UPDATE FIRMWARE:
• Visit www.dyem2.com to download the latest firmware and additional info
• Save the firmware to a flash drive and using a USB to Micro USB adapter
plug into the e.VOKE charging port.
• Turn your e.VOKE on and the LED light will turn white.
• Tap the rear #3 button. The LED light will turn Blue. This signifies that the
e.VOKE has found the file and is ready to begin the update.
• Press the center #2 button to start update. The LED will flash green and
then begin to flicker Blue. This will take one to two min to complete.
• When update is complete the LED will flash green once more and return
to a solid blue.
• The update is complete, you can now un-plug the cable from the e.VOKE.
AIR SYNC:
With the e.VOKE system installed your M2 and i5 e.VOKE will automatically
pair and sync when both units are powered on, via DYE’s air sync wireless
connection. To un-pair or trouble shoot enter into the configuration menu
on your M2.
GAME TIMER:
The MOSAir will feed game timer info to the e.VOKE and give you alerts
as you become low on time. Set your game timer by entering into the
“PERFORMANCE SETTINGS” menu on your M2 and select the “GAME
TIMER”.
ELIMINATION TRACKER:
The e.VOKE will help you track how many opponents you eliminate. Use
it to track how many bad guys are left in a game, or keep a tally of your
personal eliminations for the whole day. Simply tap the front #1 button each
time you add an elimination to your tally. To retrieve your current count tap
the center #2 button. To reset the count press and hold the front #1 button
for two seconds.
SHOT TRACKER:
Get alerted when your paint supply is running low. Enter the projected
amount of paint you will be shooting by entering the“DATA SETTINGS“
menu on your M2. Go to the “SHOT TRACKER” and Select. Set the
countdown value in increments of 25 until you reach your desired paint
count. The value is the amount of paint you are carrying onto the field for
that game or have budgeted for the day. The MOSAir system will track
your shots and alert you when you are running low. Alerts are automatic
at 500, 250, 100, and 50. You can prompt an update by pressing the middle
#2 button. To reset the shot tracker between games press and hold the M2
joystick to the left for 2 seconds.
POWER LEVEL ALERTS:
You will never have to look at a battery level indicator again; the e.VOKE will
let you know when it is time to recharge your system with plenty of notice
to finish off the day before plugging in.
PRESSURE REPORT:
Get verbal confirmation of your M2’s Hyper Reg and LPR Pressure output.
Tap the joystick to the left and enter the “SYSTEMS CHECK SCREEN” , this
will prompt the e.VOKE to relay your operating pressures to you verbally.
FEATURES:
E.VOKE STATUS
In Program Menu
Language Update Mode
Selected
Language Update
Activated
Language Update
in Process
Language Update
Complete
Language Update
Complete - Unplug
OPERATION/STATUS
Connect Flash Drive
and power on
Tap front #1 button
Tap center #2 button
LED COLOR
Solid
White
Solid
Purple
Single
Green Flash
Flickering
Purple
Single
Green Flash
Solid
Purple
LANGUAGE UPDATE LED INDEX CHART
OPERATION/STATUS
Connect Flash Drive
and power on
Tap rear #3 button
Tap center #2 button
LED COLOR
Solid
White
Solid
Blue
Single
Green Flash
Flickering
Blue
Single
Green Flash
Solid
Blue
E.VOKE STATUS
In Program Menu
Firmware Update Mode
Selected
Firmware Update
Activated
Firmware Update
in Process
Firmware Update
Complete
Firmware Update
Complete - Unplug
FIRMWARE UPDATE LED INDEX CHART
WARNING:
This is not a toy. Misuse may cause serious injury or death.
Eye protection designed specifically for the sport of must
be worn at all times by the user and persons within range.
Recommended age of 18 years or older to purchase. Persons
under 18 years of age must have adult supervision.
READ OWNER’S MANUAL BEFORE USING.
Approved
Paintball Eye
Protection
Required For
Use
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a partic-
ular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modi cations not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
RADIATION EXPOSURE STATEMENT:
The product comply with the FCC portable RF exposure limit set forth for
an uncontrolled environment and are safe for intended operation as de-
scribed in this manual. The further RF exposure reduction can be achieved
if the product can be kept as far as possible from the user body or set the
device to lower output power if such function is available.
BUTTON CHART
BUTTON
Button #3 rear
#1 and #3
#1 and #2
#3 and #2
SINGLE CLICK
Add to G-count
Game times updates
Shot tracker update
Motivations
HOLD #2, TAP #1 =
Volume +
HOLD #2, TAP #3 =
Volume -
PRESS/HOLD
Reset G-count
POWER : HOLD 2 SEC =
ON, HOLD 3 SEC = OFF
Search for device for pairing
Button #1 front
Button #2 center
TRAINING MODES:
Activate training mode in your M2 and use the e.VOKE to help walk you
through training. e.VOKE will provide start, stop, and set instructions to
keep you focused and productive while training.
SERVICE ALERTS:
The MOSAir service system is directly linked to the e.VOKE. When your
M2 is due for service, the e.VOKE will communicate to you what system
needs service.
FEATURES:
1 (front)
2 (center)
3 (rear)
Do not modify the lens, goggle, goggle frame, mask, strap or
any other part of the goggle system. Modifying the goggle
system may void the warranty and can lead to serious injury.
Frequency: 2402~2480MHz