User's Manual Part 1

11
WWW.DYEPAINTBALL.COM
SOFTWARE UPGRADE
Periodically DYE will release new updated software for the M2.
The new software will be available on www.dyem2.com, and
www.dyepaintball.com
TO UPDATE YOUR M2’s OPERATING SYSTEM FOLLOW
THESE SIMPLE DIRECTIONS.
• Save the new operating software to your Customer Support Passport,
or any standard fl ash drive.
• Plug the fl ash drive into the upgrade cable (supplied with your M2).
• Plug the cable into your M2, use the same port you use to charge
your battery.
• To access the M2’s micro USB port open the dust cover labeled
USB on the upper left side of the grip. Lift and rotate the cover out of
the way.
• Scroll down and select upgrade software.
• Power on your M2, the USB sync screen will be displayed.
• Press the Center of the joystick to initiate the upgrade process.
• Confi rm you wish to upgrade the software.
• The system will begin to upgrade the software.
• This may take several minutes.
• Do not unplug the cable until you are prompted to do so.
• Once the cable has been unplugged the board will
automatically power off. This signifi es the upgrade is done,
and the M2 is ready for use.
Upgrade
Cable