User's Manual

WWW.DYEPAINTBALL.COM
When servicing your marker:
• Make sure a barrel sock is fitted to the DAM™.
• Make sure your loader/magazine is removed from the DAM™.
• Make sure there are no paintballs in the breech of the DAM™.
• Always remove the first stage regulator and relieve all residual gas
pressure from the DAM™ before disassembly.
• The DAM™ can hold a small residual charge of gas, typically 2
shots, with the first stage regulator removed. Always discharge the marker
in a safe direction to relieve this residual gas pressure.