Installation Guide

Note: Your faucet is designed for a hole with a diameter of 1 1/4” (30mm) and a deck

thickness of up to 1 1/2” (38mm).

Step 1: Unscrew the shank (1) from the faucet (if it is connected) and place it to the

side, along with the faucet base (2), if applicable, gasket (3), washer (4) and

mounting nut (5).

Diagram 2

Diagram 1

VesselFaucetInstallationInstructions

1.5” (38mm)

1.25” (30mm)