Installation Guide
7
Step 7: After the water valves are turned on, let water lter through the faucet for 30
seconds. Evaluate all connections for leakage. After this process is complete,
you may proceed to use your new faucet.
Diagram 7
WaterfallFaucetInstallationInstructions
Step 1: To clean the faucet lter screen, unscrew the two Allen wrench screws (1)
underneath the faucet. Remove the plate (2). Once the plate is removed, the
bottom lter screen (3) will detach from the faucet. Proceed to thoroughly
clean the lter screen with high pressure water. Reverse the aforementioned
process for reassembly.
WaterfallFilterCleaningInstructionsforA19Series
1
2
3
Plate Attached Plate Removed