Installation Guide

2
Note: Your faucet is designed for a hole with a diameter of 1 1/4” (30mm) and a deck
thickness of up to 2” (50mm). If a soap dispenser is provided, the soap
dispenser hole should not be larger than 1 1/2”.
Please shut o water valves before conducting faucet assembly.
Step 1: Unscrew the shank (1) from the faucet (if it is connected) and place it to the
side, along with the rubber gasket (2), washer (3) and mounting nut (4).
Diagram 2
Diagram 1
Pull-Out/Down Kitchen Faucet Installation Instructions
2” (50mm)
1.25” (30mm)
1
3
2
4
<1.5” (38mm)
<1.5” (38mm)