Instructions / Assembly

INSTALLATION STEPS
STEP 1
CUT OFF THE MAIN POWER SUPPLY.
BEFORE YOU START, HERE IS SOME IMPORTANT INFORMATION.
IMPORTANT
to prevent personal injury or damage to the product; If the glass is
broken, please stop using it and replace it from agent or manufacturer.
● Ensure the mounting surface is dry and strong enough to bear four
● Special care should be taken when drilling walls to avoid hidden
● The product covers the outlet box and the wirings after installation.
● Wipe clean with a soft, dry cloth. Never use abrasives or chemical
● Please put a soft cushion under the mirror while you take the mirror
down from the wall.
MAINTENANCE
times the weight of the product for the safe fitting.
pipes or electrical cables.
INSTALLATION INSTRUCTION
● This product contains glass parts. Take care while fitting or handling
TOOLS REQUIRED
Description
Drill
Parts Image
Cross Head
Screwdriver
Description
Tape Measure
Pencil
Parts Image
Spirit Level
Hammer
WARNING: Installation must be performed
by a qualified licensed electrician.
DANGER: Before installation, make sure
the main power is cut off.
cleaners.
BLACK WIRE --- POWER SUPPLY L (LIVE)
WHITE WIRE --- POWER SUPPLY N (NEUTRAL)
GREEN WIRE --- POWER SUPPLY E (EARTH)
Connect the wires of cabinet with the main power by the wire connectors.
STEP 2
the wall. Ensure the cabinet is fixed firmly by the screws on the wall.
STEP 3
WARNING: This appliance must be earthed.
STEP 4
Mark the positions of the mounting holes on both sides of the wall, using a
pencil and a spirit level, insert the wall plugs after you drill the holes, The
STEP 5
Carefully put the glass shelves into the cabinet.
Peel off the protective film from the mirror and clean with a soft cloth.
Recess the whole cabinet into the wall, screw the cabinet on both sides of
maximum recessed depth is 90mm.