Installation Guide

Hang the mirror cabinet onto the Z bar until they are completely stuck. ' '
STEP 4 STEP 5
STEP 6
WARNING: This product must be earthed.
BLACK WIRE --- POWER SUPPLY L (LIVE)
WHITE WIRE --- POWER SUPPLY N (NEUTRAL)
GREEN WIRE --- POWER SUPPLY E (EARTH)
Connect the wires of cabinet with the main power by the wire connectors.
Black
Live
Green
Ground
Neutral
White
STEP 6
STEP 7
1. Switch on Light and Defogger by short-touching the button.
MANUAL TO THE MIRROR CABINET WITH TOUCH SENSOR
2. Adjusting color temperatures (CCT) between warm white and cool
3. Adjusting the brightness (Dimming) by long-touching the button.
white by long-touching the button.
4. Repeat Point 2 and 3 by long-touching the button again.
5. Switch off Light and Defogger by short-touching the button.
1.
The Bluetooth is controlled by the touch switch when the rocker switch
inside the cabinet is on, it won’t work when the rocker switch is off.
2. Activate the Bluetooth on your device and search for ‘RRD-126L’.
3. Play the music which will come out from your mirror. Adjust the volume
The mirror will give out a tone to confirm the connection successfully.
on your device.
MANUAL TO THE MIRROR CABINET WITH BLUETOOTH
STEP 7