Disposal Button Manual 2.
Disposal Button Manual 2.
Product Specifications & Features Product Specifications/Features CAREFULLY READ THIS INSTRUCTION MANUAL BEFORE INSTALLING AND USING THIS PRODUCT. PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE FOR PRODUCT OPERATION AND MAINTENANCE. IMPORTANT Always operate this product from a power source of the same voltage, frequency and rating. Do NOT operate this product if the power cord is damaged, or if the product appears damaged in any manner.
Product DescriptionProduct & Helpful Description Tips & Helpful Tips Product Description & Helpful Tips The Dyconn Faucet Garbage Disposal Push Button is a convenient and attractive kitchen accessory that can be easily mounted to any sink or countertop – perfect for island installation. Enjoy quick and easy accessibility to garbage disposal functionality while complimenting the look of your kitchen decor.
Installation Steps Step 1: Mounting the Push Button A. Mount the Push Button through a standard countertop hole. Make sure the attached rubber gasket is installed between the countertop and the push button. The use of an existing soap dispenser countertop hole will suffice, granted the hole is 1-1/4” in diameter. If installation of a hole for the Push Button is required, simply drill a 1-1/4” diameter hole through the countertop. Proceed to install the push button and rubber gasket.
Installation Steps Step 2: Installing the Air Tubing A. Firmly push and install one end of the air tubing into the female connector, located on the bottom of the push button. Push Button Air Tubing B. Measure the distance from the push button to the dedicated location where the Push Button Power Wall Adapter will be installed . If required, cut the air tubing and insert the open end to the female connector on top of the Push Button Power Wall Adapter. Air Tubing Power Cord Power Wall Adapter www.
Installation Steps Step 3: Installing the Power Adapter A. Use the 4 screws and insert them into the screw ports on the Push Button Power Adapter. Screw the 4 screws into a designated wall surface, securing the power adapter in place. B. Plug the Push Button Power Wall Adapter’s power cord into a grounded 120V AC outlet. AC Wall Outlet Wall Adapter Power Cord 7 Disposal Button Manual 2.indd 7 www.dyconnfaucet.
Installation Steps Step 4: Connecting the Garbage Disposal A. Plug the garbage disposal power cord into the Push Button Power Wall Adapter. Garbage Disposal Power Adapter CAUTION: Garbage Disposal may start when the disposal cord is plugged into the Push Button Power Wall Adapter. Push the Push Button once to stop the garbage disposal. www.dyconnfaucet.com Disposal Button Manual 2.
Installation Diagram Installation Assembly Diagram The illustration below represents the typical installation assembly. Push Button Wall Outlet Power Adapter Garbage Disposal IMPORTANT: When and if a foreign object falls into the sink’s garbage disposal blade compartment, or should cleaning of the garbage disposal be desired, immediately unplug the garbage disposal power cord from the Push Button Power Wall Adapter.
Push Button Operation Operating the Push Button A. Press and release the Push Button to turn On garbage disposal. B. Press and release the Push Button again to turn Off garbage disposal. Press/Release Button www.dyconnfaucet.com Disposal Button Manual 2.
Manufacturer Limited Warranty All Dyconn Faucet products are manufactured and tested with the highest quality standards and rigorous quality control process. This warranty is limited to the non-commercial use of Dyconn Faucet products purchased and installed in the United States and Canada.
Disposal Button Manual 2.
