Installation Guide

6
Step 5: Install the rubber gasket (1) and screw the mounting nut (2) onto the
faucet shank. Be sure the large side of the mounting nut is facing up. Tighten
the mounting nut, while making sure not to over-tighten the mounting nut.
Step 6: During faucet installation, lings, chips, and other debris can fall into the
plumbing pipes. This debris can damage the internal faucet surfaces which
can cause leakage. Before turning on the water valves, make sure the faucet
handle is in the open (On) position in order to thoroughly ush out debris.
Diagram 6
Diagram 5
Installation Instructions
2
1