Installation Guide

6
Step 1: Remove stopper (1) and ange (2) with plastic washer (3) and gasket (4). Screw nut (5)
all the way down. Push the black gasket (6) down.
Step 2: Apply silicone to underside of the ange (1). Insert body (2) into sink. Add gasket (3)
and add washer (4). Screw ange onto body. Pivot hole (5) must face back of sink.
Tighten nut/gasket, clean excess silicone.
Diagram 2
Diagram 1
Pop-Up Installation
1
2
6
3
5
4
2
3
4
5
1