Installation Guide

4
Step 4: Place faucet spout (1) with base (2) and gasket (3) through the top of the sink
mounting hole. Secure the spout with washer (4) and nut (5).
Note: If sink is uneven, use silicone under the gasket.
Step 5: Install splitter (1) onto the faucet spout shank.
Note: You might want to consider using plumbers tape for added protection
against leakage. Ensure the splitter is securely tightened and that the splitter
openings are facing left and right.
Diagram 4
1
1
2
3
5
4
Diagram 3