Installation Guide
10
Step 2:  Attach both water hoses to the faucet by screwing them into the two internal 
  ports located inside the base of the faucet. The red/blue indicator on the 
  side of the handle illustrates the hot water hose (red - 1) is attached to the left 
  port while the cold water hose (blue -2) is attached to the right port. 
Step 3:  Attach the shank (1) and base (2) and proceed to install the faucet through the 
  deck mounting hole. Be sure to align the faucet in the desired direction. Please 
  note the rubber base seal is pre-installed inside to the faucet base. 
Diagram 4
Diagram 3
Vessel Faucet Installation Instructions
1 2
1
2










