Installation Guide

ManualsBrandsDyconn Faucet ManualsBathroomEdison Crystal 30-in Silver Oval Frameless Lighted LED Bathroom Mirror

Product Features:

Frameless backlit Mirror

Extra thick frosted LED light

Can be vertical or horizontal hanging

Touch switch on & o

Touch switch dim function

Anti-fog pad

LED Backlit Mirror

Sizes: 12” W x 16“ H (horizontal or vertical)

24” W x 32”H (horizontal or vertical)

30” W x 36”H (horizontal or vertical)

Model: Catella M09AT, Catella-Plus M10AT Royal M12AT,

Edison M13AT, Swan M14AT, Egret M16AT

Thoroughly read all instructions before installing the enclosed product.

Read and take note of all safety, care, and maintenance information.

E491008

Summary of content (12 pages)

PAGE 1
Product Features: Frameless backlit Mirror Extra thick frosted LED light Can be vertical or horizontal hanging Touch switch on & o Touch switch dim function Anti-fog pad LED Backlit Mirror Sizes: 12” W x 16“ H (horizontal or vertical) 24” W x 32”H (horizontal or vertical) 30” W x 36”H (horizontal or vertical) Model: Catella M09AT, Catella-Plus M10AT Royal M12AT, Edison M13AT, Swan M14AT, Egret M16AT Thoroughly read all instructions before installing the enclosed product.
PAGE 2
PAGE 3
Warning: Please read!! electrician. 2. During installation please make sure the circuit breaker or the with a live line on. 3. It is recommended to have at least two people available to install the mirror. Remember to wear proper protective gear during installation. All mirror glass is non-tempered glass and can result in sharp shards if the glass is shattered. wall. Using the proper anchor and screws for securing the unit to the wall is crucial. Screwing to the stud is recommended.
PAGE 4
Product Features: Frameless backlit Mirror Extra thick frosted LED light Can be vertical or horizontal hanging Touch switch on & o Touch switch dim function Anti-fog pad Model: Catella M09AT Package Content: LED backlit Mirror Screws Studs Mounting bracket Metal back frame 5 mm silver mirror Frosted Mirror Bracket Screw x 3pcs Vertical Mounting OR Horizontal Mounting Power cord Touch switch Rubber gasket Note: Only one mounting bracket is available , please choose either vertical or horizontal Mounti
PAGE 5
Model: Royal M12AT Metal back frame 5 mm silver mirror Frosted Mirror Bracket screw x 3pcs Vertical Mounting OR Horizontal Mounting Power cord Touch switch Rubber gasket Model: Edison M13AT Metal back frame 5 mm silver mirror Frosted Mirror Bracket screw x 3pcs Vertical Mounting OR Horizontal Mounting Power cord Touch switch Rubber gasket Note: Only one mounting bracket is available , please choose either Vertical or Horizontal Mounting 1 E491008
PAGE 6
12.0'' 0.8'' 0.6'' 5 mm silver mirror 16.0'' Frosted Mirror Touch switch 16.
PAGE 7
Step 1: Using a I-Beam level to mount the included mounting bracket with 3 screws (using anchor when its installing on drywall, concrete or Tile surface). Step 2: the neutral (White), hot (black) and ground (copper wire or Green) wire between the mirror and the junction box. Step 3: Hang the mirror with desired placement (vertical or Horizontal) by placing the mirror’s cut out on to the mounting bracket.
PAGE 8
LED Mirror Power Source FAQ Internal Power Flow Diagram Scenario 1 (Direct Wired) This is the most common way to connect the mirror. The LED light & anti fog pad are both controlled by the built-in touch switch on the mirror. *The LED light is dimmable. 110VAC Input Power Source: Constant 110AC power 110VAC -12VDC LED driver Output Anti-fog pad Output Dimmer Switch 12V LED Light Scenario 2 (Wall Switch) By doing so, the mirror is now bridged to the wall switch.
PAGE 9
Introducing Tri-Color Mirrors and Additional Features In the near future, Dyconn Faucet will be upgrading our mirror products to include tri-color options and additional features.
PAGE 10
Dyconn Faucet LED Small Mirror Frequently Asked Questions & Troubleshooting Guide 1. Can I connect to a dimmer on the wall to dim the mirror (ELV or non ELV dimmer) Answer: Unfortunately, no, the mirror cannot be connected to an ELV dimmer or traditional non-ELV dimmer switch. All Dyconn Faucet mirrors contain low voltage LEDs and the power supply will not work properly if the source AC is altered through a wall AC dimmer. 2. Can I connect to a non-dimmer wall switch? Answer: Yes.
PAGE 11
Wall Switch Bypass Instructions 3. 2. Numbers will correspond to following tags attached to the wires 1. + - 12 2. LED 3. E491008 Use the following steps to wire mirror to an electrical wall switch and bypass the touch sensor: 1. Disconnect all connections from the touch sensor (#1-3). 2. Connect the LED Power Supply directly to the 12V DC LED Connector (#1 and #2 circled in red).
PAGE 12
Manufacturer Limited Warranty E491008 All Dyconn Faucet products are manufactured and tested with the highest quality standards and rigorous quality control process. This warranty is limited to the non-commercial use of Dyconn Faucet products purchased and installed in the United States and Canada.