Installation Guide
2
E491008
Step 1
Step 2
Step 3
3. Hang the mirror
accordingly on the wall.
2. Do not open mirror. Make
sure the circuit breaker for
the power source of the
mirror is off. Then connect
the neutral (White), hot
(black), and ground (copper
wire or Green) wire between
the mirror and the junction
box.
Electric wire color code:
Black: Live
Green: Ground
White: Neutral
1. Mark the desired position
on the wall. Drill the holes
and secure with the wall
studs. This mirror can only be
hung horizontally.
1.2. Make sure the screw is
secured.
Wall
Live
Ground
Neutral