Installation Guide

Conceal Box Installation Steps
4
www.dyconnfaucet.com
3. Connect hot & cold water form the
source to the inlet on conceal box. Wrap
the threads on one end of the pipewith
pipe tape or teflon tape (not included).
Screw the adapters into the female
fittings.
Level
Plate
Screw to ground
Hot
2a. Set the conceal box on the ground,
measure with the level provided.
Check the level and make sure it is
perfectly level with the ground. Then
screw the conceal box on the ground.
2b. Unscrew the plate. Remove the plate.
Knock out the level from the back of
plate.
4. Screw the plate on to the bottom of
the faucet base with the 4 hex screws
provided. Insert the whole faucet body
to the conceal box. Insert the inlet
pipe to the hot and cold outlet tube of
conceal box.
Hot
Cold
Cold
pipepipe
inlet pipe
Conceal
box