Installation Guide

5
Faucet Installation Steps
3. Attach the floor supply to hot/cold
water supply lines under the ground.
Mount bases to floor. Use screws (not
provided) for wooden floor, or use
anchor screws for concrete floor.
4. Insert rubber washers into hot/cold
coupling on faucet. Add telfon tape to
threads and attache floor supply legs to
faucet couplings. If necessary, use
telfon taper to attach hand held show to
hose and hose to tub filler.
Anchor screw provided
for concrete oor.
www.dyconnfaucet.com