Specification Sheet

©2017 AS America Inc.
www.DXV.com
OAK HILL
™
LAVATORY WALL MOUNT
FAUCET
• Designed with external waterways and traditional
two handle and spout conguration
• Can be installed as a wall mount or lavatory mount faucet
• Ceramic disc valve cartridge
• Cast brass spout
• Maximum ow rate: 1.5 gpm (5.7 L/min)
• Low ow rate: 1.2 gpm (4.5 L/min)
• Lead Free - faucet contains ≤0.25% total lead
content by weighted volume
CODES AND STANDARDS
Meets or Exceeds ASME A112.18.1/
CSA B125.1/NSF 61/Section 9
Certified Compliant with 0.25% Weighted
Average Lead Content Regulations
8"
(203 mm)
2-3/16" DIA.
(58 mm)
14-1/8"
(359 mm)
4-3/16"
(106 mm)
6-15/16"
(176 mm)
6-1/2"
(165.2 mm)
15˚
3-1/16"
(78 mm)
SINK INSTALLATION
WALL INSTALLATION
4-3/16"
(106 mm)
6-15/16"
(176 mm)
15˚
CROSS BRACE
FINISHED WALL
HOLE SIZE IN WALL
1-5/16" MIN. (33 mm)
1-1/4
1-1/4
" MAX. (45 mm)
13/16" MIN. (19.5 mm)
" MAX. (32.2 mm)
1/2" ELBOW WITH
MOUNTING FLANGE
WALL STUDS
6-1/2"
(165.2 mm)
DESCRIPTION PRODUCT NUMBER
1.5 gpm (5.7 L/min)
Wall Mount Faucet D35155450.XXX
1.2 gpm (4.5 L/min)
Wall Mount Faucet D3515545C.XXX
AVAILABLE FINISHES FINISH CODE
Polished Chrome 100
Brushed Nickel 144
Platinum Nickel 150
Satin Brass* 427
Meets the Americans with Disabilities Act
Guidelines and ANSI A117.1 Requirements
for the physically challenged.
Revised 2/17
IMPORTANT: These measurements are subject to change or cancellation.
No responsibility is assumed for use of superseded or voided pages.