Installation Sheet

- 6 -
4
4
4
5
5
5
10
6
6
8
M965648
4
6
TEST INSTALLED FAUCET
• Install ESCUTCHEON (4) and ADAPTER NUT (5) onto each OFFSET SHANK (10). Gradually tighten ADAPTER NUTS (5)
until ESCUTCHEONS (4) are  ush against the  nished wall.
• With HANDLES in OFF position, turn on water supplies and check all connections for leaks.
• Remove AERATOR
(8)
(8)
with the key provided
with the key provided.
• Operate HANDLES to  ush water lines thoroughly.
• Re-install AERATOR
(8)
(8) and tighten.
INSTALL ESCUTCHEONS AND ADAPTER NUTS
WALL-MOUNT INSTALLATION
5
INSTALL FAUCET
• Insert faucet inlets into ADAPTER NUTS (5) and OFFSET SHANKS (10).
• Gradually tighten MOUNTING NUTS (6) evenlty. If they become too
dif cult to turn and are binding, please check the following:
— One side has been tightened too much and the body is uneven.
— Loosen the tight side and gradually tighten MOUNTING NUTS (6)
evenly. Tighten fully with adjustable wrench.