Specification Sheet

OAK HILL

SINGLE LEVER FAUCET

• The Oak Hill Single Lever Faucet brings the charm

and lasting appeal of the traditional farmhouse

aesthetic into today’s home

• Ceramic disc valve cartridge

• Cast brass spout

• Low ﬂow rate: 1.2 gpm (4.5 L/min)

• Grid drain included with faucet

• Lead Free - faucet contains ≤0.25% total lead

content by weighted volume

CODES AND STANDARDS

Meets or Exceeds ASME A112.18.1/ CSA B125.1,

NSF 61/Section 9

EPA WaterSense® Certified

Certified Compliant with ≤0.25% Weighted

Average Lead Content Regulations

CEC and CALGreen® Compliant

DESCRIPTION PRODUCT NUMBER

Single Lever Faucet D35155100.XXX

AVAILABLE FINISHES FINISH CODE

Polished Chrome 100

Brushed Nickel 144

Platinum Nickel 150

Satin Brass 427

Meets the Americans with Disabilities Act

Guidelines and ANSI A117.1 Requirements

for the physically challenged.

10/20

ROUGH-IN DIAGRAM

SHOWN ON NEXT PAGE

CALGreen® is a registered trademark of

California Building Standards Commission.

Polished

Chrome

Brushed

Nickel

Platinum

Nickel

Satin

Brass

PAGE 1
OAK HILL® SINGLE LEVER FAUCET •T he Oak Hill Single Lever Faucet brings the charm and lasting appeal of the traditional farmhouse aesthetic into today’s home • Ceramic disc valve cartridge • Cast brass spout • Low flow rate: 1.2 gpm (4.5 L/min) • Grid drain included with faucet •L ead Free - faucet contains ≤0.25% total lead content by weighted volume CODES AND STANDARDS Meets or Exceeds ASME A112.18.1/ CSA B125.1, NSF 61/Section 9 EPA WaterSense® Certified Certified Compliant with ≤0.
PAGE 2
OAK HILL® SINGLE LEVER FAUCET 6-9/16" (167 mm) 8-1/2" (213 mm) 4-7/8" (124 mm) 4-3/8" (112 mm) 2-1/2" (65 mm) 2-3/8" (60 mm) 2-3/8" (60 mm) 5-3/16" to 7-11/16" (131 to 195 mm) 1-1/4" O.D. (32 mm) NOTE: MOUNTING HOLES ARE 1-3/8" D. (35 mm) IMPORTANT: These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. ©2020 AS America Inc. 10/20 www.DXV.