Installation Sheet

- 3 -
M965827 (4/17)
4
INSTALL HANDLES
5
TEST INSTALLED FAUCET
• With HANDLE (1) in OFF position, turn on WATER SUPPLIES and check all connections for leaks.
• Operate HANDLES (1) to ush water lines thoroughly.
• Slide BARREL SLEEVE WASHER (1) onto VALVE STEM (2) until WASHER (1) is on the smooth section of the VALVE STEM (2).
• Thread BARREL SLEEVE (3) onto VALVE BODY (4) and tighten.
• Align HANDLE as shown or as desired and install HANDLE ASSEMBLY (6) onto VALVE STEM (2).
• Thread HANDLE BASE (5) onto BARREL SLEEVE (3) until tight.
• Turn on the water supply. Check that the tting works correctly and does not leak.
2
4
1
6
3
SMOOTH SECTION
5
ON
OFF
ON
OFF
1