Installation Sheet

ManualsBrandsDXV ManualsBathroom FaucetsDXV Modulus 1.2 GPM Wall Mounted Widespread Bathroom Faucet

- 1 -

INSTALLATION INSTRUCTIONS

Product names listed herein are trademarks of AS America, Inc.

SAVE FOR FUTURE USE

RECOMMENDED TOOLS AND MATERIALS

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing

supply stores. It is essential that the tools and materials be on hand before work has begun.

M965827 (4/17)

Model D35120450

To be used with D35000450.191

Dual Control Wall Mount Lavatory Rough

DXV Modulus

™

Wall-Mounted

Lavatory Faucet

ROUGHING-IN DIMENSIONS:

• For reference

Plumbers' Putty or CaulkingAdjustable Wrench

Phillips Screwdriver

Flat Blade Screwdriver

Channel Locks Teon Tape

In the United States:

DXV

One Centennial Avenue

Piscataway, New Jersey 08855

Attention: Director of Customer Care

For residents of the United States, warranty

information may also be obtained by calling

the following toll free number: (800) 227-2734

www.DXV.com

In Canada:

DXV

5900 Avebury Road

Mississauga, Ontario

L5R 3M3

Canada

Toll Free: 1-800-387-0369

Local: 905-306-1093

Fax: 1-800-395-1498

www.DXV.ca

In Mexico:

DXV

Via Morelos 330

Col. Santa Clara Coatitla

Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200

www.DXV.mx

Thank you for selecting DXV. To ensure that your

installation proceeds smoothly, please read these

instructions carefully before you begin.

1-3/4" D.

(45 mm)

7-1/8"

(180 mm)

1-9/16"

(40 mm)

9-1/16"

(214 mm)

1-13/16"

(46 mm)

(203 mm)

1-5/8" to 2-1/2"

(41 mm to 62 mm)

FINISHED

WALL

FINISHED WALL

1/2" NPT

UNION INLETS

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS DXV Modulus™ Wall-Mounted Lavatory Faucet Model D35120450 To be used with D35000450.191 Dual Control Wall Mount Lavatory Rough Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing supply stores. It is essential that the tools and materials be on hand before work has begun.
PAGE 2
1 INSTALL WALL BRACKET WOOD SCREWS CROSS BRACE • Determine where the finished wall location will be. This measurement is very important! Note: The rough-in measurement from the finished wall is; 1-9/16" (40 mm) minimum and 2-7/16" (62 mm) maximum. This is a 7/8" (22 mm) tolerance. See rough-in illustration. • Secure WALL BRACKET (1) to cross brace of wall structure at required height using six wood screws.
PAGE 3
4 INSTALL HANDLES • Slide BARREL SLEEVE WASHER (1) onto VALVE STEM (2) until WASHER (1) is on the smooth section of the VALVE STEM (2). • Thread BARREL SLEEVE (3) onto VALVE BODY (4) and tighten. • Align HANDLE as shown or as desired and install HANDLE ASSEMBLY (6) onto VALVE STEM (2). • Thread HANDLE BASE (5) onto BARREL SLEEVE (3) until tight. • Turn on the water supply. Check that the fitting works correctly and does not leak.
PAGE 4
DXV Modulus™ Wall-Mounted Lavatory Faucet MODEL NUMBER D35120450 Replace the “YYY” with appropriate finish code POLISHED CHROME 100 BRUSHED NICKEL 144 PLATINUM NICKEL 150 H960854.191 ADAPTER RECEIVER H960853.191 ADAPTER M970306-YYY0A SPOUT ESCUTCHEON KIT M970305-YYY0A EXTENSION M970304-YYY0A LEVER HANDLE H960740.