Specification Sheet

REM

SINGLE LEVER LAVATORY

AND VESSEL FAUCETS

• European minimalist design

• Cast brass spout and body

• Joystick multiport ceramic disc valve cartridge

• 5-3/4" spout

• Speed Connect® with 1-1/4" drain

• Lead Free—faucet contains ≤0.25% total

lead content by weighted volume

• Maximum ow rate: 1.5 gpm (5.7 L/min)

• Low ow rate: 1.2 gpm (4.5 L/min)

CODES AND STANDARDS

Meets or Exceeds ASME A112.18.1/

CSA B125.1/NSF 61/Section 9

EPA WaterSense® High Efficiency

Lavatory Faucet Specification

Certified Compliant with 0.25% Weighted

Average Lead Content Regulations

DESCRIPTION PRODUCT NUMBER

1.5 gpm (5.7 L/min)

Single Lever Lavatory Faucet D35100100.XXX

Single Lever Vessel Faucet D35100150.XXX

1.2 gpm (4.5 L/min)

Single Lever Lavatory Faucet D3510010C.XXX

Single Lever Vessel Faucet D3510015C.XXX

AVAILABLE FINISHES FINISH CODE

Polished Chrome 100

Brushed Nickel 144

Meets the Americans with Disabilities Act

Guidelines and ANSI A117.1 Requirements

for the physically challenged.

ROUGH-IN DIAGRAM

SHOWN ON NEXT PAGE

PAGE 1
REM® SINGLE LEVER LAVATORY AND VESSEL FAUCETS • European minimalist design • Cast brass spout and body • Joystick multiport ceramic disc valve cartridge • 5-3/4" spout • Speed Connect® with 1-1/4" drain •L ead Free—faucet contains ≤0.25% total lead content by weighted volume • Maximum flow rate: 1.5 gpm (5.7 L/min) • Low flow rate: 1.2 gpm (4.5 L/min) CODES AND STANDARDS Meets or Exceeds ASME A112.18.1/ CSA B125.
PAGE 2
REM® SINGLE LEVER LAVATORY AND VESSEL FAUCETS 1-1/2" (38 mm) 11-7/8" (302 mm) 11-3/8" (289 mm) 6" (152 mm) 7-1/8" (181 mm) 8-1/4" (210 mm) MOUNTING SURFACE 2" (51 mm) 1-3/16" MAX. (30 mm) 5/8" MIN. (15 mm) 20" (508 mm) 3/8" (10mm) SUPPLIES MOUNTING SURFACE MOUNTING SURFACE 2-7/16" (65 mm) 2" MAX. (51mm) 10" MAX. (254 mm) 5-3/4" (146 mm) 1-1/2" (38 mm) 2" (51 mm) 6-3/4" (171 mm) 3-1/2" (89 mm) 2-7/16" (65 mm) 1-3/16" MAX. (30 mm) 5/8" MIN. (15 mm) 20" (508 mm) 1-1/4" O.D.