Installation Sheet

- 2 -

M965700 Rev. 1.0 (3/17)

• Install O-RING SEAL (1) into bottom of faucet.

• Feed FLEXIBLE FAUCET SUPPLIES (2) SHANKS (3) and CABLE CONNECTOR (4) through the

mounting hole of lavatoryor mounting surface.• Install O-RING SEAL (1) into bottom of faucet.

• From below, Install “C” WASHER (5), and LOCKNUTS (6) onto faucet SHANKS (3). Before nal

tightening, adjustfaucet so that it is centered and covers mounting hole. Tighten LOCKNUTS (6)

using a screwdriver or hex wrench.

INSTALL VESSEL OR MONOBLOCK FAUCETS

CAUTION

Turn off hot and cold water

supplies before beginning.