Installation Sheet

- 1 -
INSTALLATION INSTRUCTIONS
4"
(102 mm)
3-13/16"
(97 mm)
COUNTERTOP
(BY OTHERS)
5"
(127 mm)
28"
(711 mm)
6-9/16"
(167 mm)
1-1/4" (32 mm) O.D.
WASTE
1-1/4" (32 mm) O.D.
TAILPIECE
20"
(508 mm)
18"
(457 mm)
FINISHED
FLOOR
SUPPLIES
AS REQ’D
6"
(152 mm)
*
CUTOUT AREA
4"(102 mm)
1-3/4" (45 mm)
DIA. STD.
DRAIN OUTLET
FINISHED WALL
4" (102 mm) MIN.
IF REAR AREA
FAUCET IS USED
11"
(278 mm)
22"
(557 mm)
20-7/8"
(531 mm)
7-1/2"
(190 mm)
15"
(380 mm)
13-15/16"
(354 mm)
COUNTERTOP
(BY OTHERS)
CEMENT
BOND
4"
(102mm)
5"
(127mm)
28"
(711 mm)
1-1/4" (32 mm) O.D.
WASTE
1-1/4" (32 mm) O.D.
TAILPIECE
20"
(508 mm)
18"
(457 mm)
FINISHED
FLOOR
SUPPLIES
AS REQ’D
6"
(152 mm)
*
6-9/16"
(167 mm)
1-3/4" (45 mm)
DIA. STD.
DRAIN OUTLET
FINISHED WALL
CUTOUT AREA
4" (102 mm)
4" (102 mm) MIN.
IF REAR AREA
FAUCET IS USED
7-1/2"
(190 mm)
7-1/2"
(190 mm)
15"
(380 mm)
15"
(380 mm)
1-1/4" (32 mm) O.D.
WASTE
1-1/4" (32 mm) O.D.
TAILPIECE
COUNTERTOP
(BY OTHERS)
CEMENT
BOND
4"
(102 mm)
13-5/8"
(346 mm)
5"
(127 mm)
28"
(711 mm)
20"
(508 mm)
18"
(457 mm)
FINISHED
FLOOR
SUPPLIES
AS REQ’D
6"
(152 mm)
*
3-13/16"
(97 mm)
6-9/16"
(167 mm)
1-3/4" (45 mm)
DIA. STD.
DRAIN OUTLET
FINISHED WALL
CUTOUT AREA
4" (102 mm)
4" (102 mm) MIN.
IF REAR AREA
FAUCET IS USED
7-1/2"
(190 mm)
7-1/2"
(190 mm)
15"
(380 mm)
15"
(380 mm)
13-15/16"
(354 mm)
3-13/16"
(97 mm)
SAVE FOR FUTURE USE
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
7302038-100 Rev. F (6/17)
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing
supply stores. It is essential that the tools and materials be on hand before work has begun.
NOTE: More specialized tools may be necessary to install this sink to countertop materials other than wood or wood composites.
PRODUCT SPECIFICATIONS
NOTES: * DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.
Thank you for selecting DXV. To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms
to local codes..
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
!
Rectangular - model #D20080
Square - model #D20085
Round - model #D20090
Pop
™
Above Counter Sinks
RECTANGLE - D20080 SQUARE- D20085 ROUND - D20090
Level
Square
Adjustable WrenchChannel Locks
Regular Screwdriver
Phillips Screwdriver
10'
Saber SawPipe Wrench
Tubing Cutter
Tape Measure
Electric
Drill
Hacksaw
Plumbers' Putty or
Caulking