User's Manual


‐
20‐
● [Data transfer mode] button operations
Users can transfer data from the Fitness Track to a PC or mobile device through
either a Bluetooth connection or using a USB connector.
BLUETOOTH DATA TRANSFER
To enter the Bluetooth data transfer mode:
Use the MODE button to select the data transfer mode. The screen will display the text
“BT”. Users can activate Bluetooth connectivity by pressing the SET button to select ON
(enabled; as shown in the bottom left figure) or OFF (disabled; as shown in the bottom right
figure). When Bluetooth is enabled, users can use a Bluetooth connection to connect the
Fitness Track to a PC or mobile device. Note: Bluetooth connections cannot be made with
the Fitness Track unless Bluetooth is enabled on both devices.
To display the Bluetooth MAC address:
In the data transfer mode, press the ADJUST button to display the MAC address (as shown
in the figure below).
Bluetooth is enabled
Bluetooth is disabled