User's Manual


‐
14‐
● [Alarm mode] button operations
To adjust the alarm time:
▲ First set the “Hour” of the alarm. After pressing the SET button, the “Hour” digit in the
“Hour:Minutes” display will begin to flash. Press the ADJUST button to set the alarm
time until the hour is correct.
▲ Next adjust the “Minutes” of the alarm. After pressing the SET button, the “Minute”
digit in the “Hour:Minutes” display will begin to flash. Press the ADJUST button to
adjust the alarm time until the minutes are correct.
▲ Then set the days for which the alarm is enabled (i.e., days of the week from
Monday-Sunday). First press the MODE button to select a day of the week and use the
ADJUST button to either enable or disable the alarm for that day. For each day, the
alarm will be set to ON (enabled; as shown in the bottom left figure) or OFF (disabled;
as shown in the bottom right figure).
▲ The icons for the days of the week are shown on the following page.
▲ Press the MODE button again. The “Hour” digit in the “Hour:Minutes” display will
begin to flash.
▲ Press the SET button to complete the alarm setting process.
The alarm is enabled
for Monday
The alarm is disabled
for Monday