Install Instructions

PAGE 1
Specifications OUTPUTS Ranges Current. 0.010 20.0mA DC in TmA steps Voltage: 0.0to 10.0V DC in 1V steps Accuracy at 28°C Current: +10.05mA DC Voltage: DC Load impedance Current: 300 ohms maximum Voltage: 1000 ohms minimum External mA Transmitter Source Voltage: 12V minimum {0 30V peak maximum RAMPING Manual Anywhere in range Auto Values: User adjustable Min. & Max. values anywhere within range Step Time: User adjustable from 1 to 20 seconds, int 1 second increments DISPLAY Numerical LCD, 00.010 99.8, 0.
PAGE 2
Operating Instructions POWER ON/OFF Make sure that the battery is installed or the AC adapter is plugged info the EXT POWER jack. The AC adapter disconnects ihe internal battery. To turn the CSC on, press and hold the upper red ON/OFF bul ton for at least 2 seconds. The LCD annunciations will cycle and then hold steady when the CSG is loomed on, To turn off, press and hold the ON/OFF button for & seconds unit "TIME" annunciation is displayed.