Manual

Analog Panel Meter Instruction Manual
94
Display Parameter Action/Setting Description
D r-gt
Display r-gt
Select to display the rate and grand total
D r-t
Display r-t
Select to display the rate and total
D r_u
Display r-u
Select to display rate and units
D rate
Display rate
Select to display the rate/PV
d-SCAL
Dual-scale
Enter d-SCAL menu and select Yes for
dual- scale or No for single scale display
D set1
Display Set 1
Select to display relay 1 set point
D tot
Display tot
Select to display the total
D unit
Display units
Select to display engineering units or label
d-Inty
Display
intensity
Set display intensity level from 1 to 8
Dec pt
Decimal point
Set decimal point for rate, total, grand total
DeLAY
Delay
Enter relay Time Delay menu
dI 1
Digital input 1
Assign digital input 1-8, if expansion
modules are connected
Diag
Diagnostics
Display parameter settings
diamr
Diameter
Enter the tank’s diameter in inches
Dis 1
Display 1
Program display 1 value
Dis 2
Display 2
Program display 2 value
disabl
Disable
Disable function key
DLY 1
Delay 1
Enter relay 1 time delay setup
dO 1
Digital
output 1
Assign digital output 1 – 8, if expansion
modules are connected
done
Done
Copy function completed
DSet 1
Display set 1
Select to display set point 1 (1-8)
dsplay
Display
Enter the Display menu
Dtot-u
Display t-u
Select to display the total & units
Enter
Enter
Assign digital input to Enter button/F3