Manual

Analog Panel Meter Instruction Manual
92
Alphabetical List of Display Functions & Messages
Display Parameter Action/Setting Description
20 mA
20 mA output
Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
4 mA
4 mA output
Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
999999
-99999
Flashing
display
Overrange condition
Underrange condition
Ack
Acknowledge Acknowledge relays
Act 1
Action 1
Set relay 1 action
Alm 1
Alarm 1
Assign digital output to Alarm 1 – 8
Altern
Alternate
Set relay for pump alternation control
(relays assigned to rate)
A-nman
Auto-manual
Set relay for automatic & manual reset
any time
Aout
Analog output
Analog output scaling
Aoutpr
Analog output
programming
Analog output programming
Asign1
Assign 1
Relay 1 assignment
Assign
Assignment
Assign relays to rate, total, or grand total
Auto
Automatic
Press Enter to set meter for automatic
operation
Auto
Automatic
For automatic reset
baud
Baud rate
Select baud rate
big
Upper display
Press Enter to assign the Upper display
parameter (default: PV or rate)
Big Hi
Max on big
display
Assign digital input to display max on the
upper display
Big HL
Max/min upper
display
Assign digital input to toggle max/min on
the upper display
Big Lo
Min on big
display
Assign the digital input to display min on the
upper display
break
Loop break
Set relay condition if loop break detected
(For mA input only)