Manual

Analog Panel Meter Instruction Manual

F4 Operation

A digital input, F4, is standard on the meter. This digital input is

programmed identically to function keys F1, F2, and F3. The input is

triggered with a contact closure to COM, or with an active low signal.

During operation, F4 operates according to the way it has been

programmed in the

Advanced Features – User menu.

Maximum/Minimum Readings

The max & min readings (peak & valley) reached by the process can be

displayed either continuously or momentary:

1. Display briefly by assigning to the F1-F3 function keys or to the

digital inputs in the

User menu.

2. Display continuously by assigning either display to max/min through

the

Display menu.

Any of the F1-F3 function keys (buttons) and the digital inputs can be

programmed to reset the max & min readings. The meters are set at the

factory to display the max reading by pressing the Up arrow/F2 button

and to use the Right arrow/F1 button to access the

Reset menu.

To display max reading using function key with factory defaults:

1. Press Up arrow/F2 button to display maximum reading since the last

reset/power-up.

2. To reset max/min press Right arrow/F1 button to access the Reset

menu. The max & min displays are reset to actual values.

3. Press Menu to exit max/min display reading.

To display max/min readings continuously:

Assign either display to Max (d Hi), Min (d Lo), or toggle between Max

and Min (

d HL) every 10 seconds.