Manual

Analog Panel Meter Instruction Manual
43
Setting the Display Parameter & Intensity (dsplay)
The upper display (Big) can be programmed to display:
1. Rate value
2. Total or grand total
3. Toggle rate/total
4. Toggle rate/G-total
5. Relay set points
6. Toggle rate and units
7. Toggle total and units
8. Toggle grand total and units
9. Max, min, or max & min values
10. Modbus input
The lower display (
Little) can be programmed to display:
1. Engineering units or custom legends for the upper display
2. Rate value
3. Total or grand total
4. Toggle rate/total
5. Toggle rate/G-total
6. Relay set points
7. Toggle rate and units
8. Toggle total and units
9. Toggle grand total and units
10. Max, min, or max & min values
11. Modbus input
12. Off (no display)
Selecting engineering units or custom legends as the lower display
(
d unit) will display the unit or tag selected for the rate, total, or grand
total displayed in the Upper display.
For example, if the upper display is set to
total, selecting d unit to
display on the lower display will have the total appear on the upper
display, and the total unit appear on the lower display.
Display Intensity: The meter has eight display intensity levels to give the
best performance under various lighting conditions. Select intensity 8 for
outdoor applications. The default intensity setting is 8.