User guide

AN24 & AN28 Annunciators Instruction Manual
21
Annunciator Alarm Type Selection
The alarm type is selected with the DIP switch located above the signal
connector.
Changing alarm types while the unit is on
will restart the unit.
Alarm Programming
Set switches to the positions shown
below for the desired alarm type. The
annunciator will immediately
automatically restart and operate with
the new alarm sequence.
Figure 12. DIP Switch
Location
ISA A* ISA F2A* ISA F1A ISA F3A
Follower ISA M ISA F1M ISA F2M
Alarm Sequence Descriptions
See Page 31 for complete sequence descriptions.
A
larm Type Selector Switch