Instruction manual

Analog Panel Meter Instruction Manual
93
Display Parameter Action/Setting Description
bypASs
Bypass
Set filter bypass value
C CAL
Current
calibration
Calibrating 4-20 mA current input (internal
reference source used for scaling the input)
C Hi
Current high
Calibrate high current input (e.g. 20 mA)
C lo
Current low
Calibrate low current input (e.g. 4 mA)
C Strt
Count Start
Set start for total or grand total countdown
Cal
Calibrate
Enter the Calibrate menu
Calib
Calibrate
Calibrate 4-20 mA output (internal
reference source used for scaling the
output)
Contrl
Control
Enter Control menu to turn relays on/off, set
analog output manually, or return meter to
automatic operation
Copy
Copy
Enter copy function
Count
Count
Set total and grand total count direction
Cutoff
Cutoff
Cutoff value
D gros
Display gross
Select to display the gross value
D gt-u
Display gt-u
Select to display grand total and units
D gtot
Display gtot
Select to display the grand total
D Hi
Display high
Select to display the max
D HL
Display H&L
Select to display the max & min toggling
D Hold
Display hold
Display hold
D Lo
Display low
Select to display the min
D nt-g
Net/Gross
Select to alternate the net and gross values
D PCt
Display PCT
Select to display percent of PV1 (dual scale
display)
D Pv
Display PV
Select to display PV
D Pv1
Display PV1
Select to display PV1 (dual scale display)
D Pv2
Display PV2
Select to display PV2 (dual scale display)