Instruction manual

Analog Panel Meter Instruction Manual
84
METER OPERATION
The meter is capable of accepting current (0-20 mA, 4-20 mA) and
voltage signals (0-5 V, 1-5 V, 0-10 V,  10 V) and displaying these
signals in engineering units from -99999 to 999999 (e.g. a 4-20 mA
signal could be displayed as -50.000 to 50.000).
The dual-line display can be customized by the user to operate in such a
way as to satisfy a specific application. Typically the upper display is
used for the process variable; while the second display is used for
engineering units, custom legend, total, grand total, or set point
indication.
The meter can be set up to display the analog input on the upper display
and the Modbus input on the second display. The relays and analog
output can be programmed to operate from the Modbus PV input.
Front Panel Buttons Operation
Button
S
y
mbol
Description
Press to enter or exit Programming Mode,
view settin
g
s, or exit max/min readin
g
s
Press to reset max/min readings or other
parameter/function assigned through the
User menu
Press to display max/min readings or
other parameter/function assigned
throu
g
h the User menu
Press to acknowledge relays or other
parameters/function assigned through the
User menu
Function Keys Operation
During operation, the programmable function keys operate according to
the way they have been programmed in the Advanced Features – User
menu.
The table above shows the factory default settings for F1, F2, and F3.