Instruction manual

Analog Panel Meter Instruction Manual
28
Front Panel Buttons and Status LED Indicators
Button Description LED Status
Menu 1-8
Alarm 1 – 8 indicators.
Flashing with M Indicates
Manual Control Mode
Right arrow/F1 R Rate indicator
Up arrow/F2 T
Total indicator or
Flashing: Tare
Enter/F3 G T Grand Total indicator
Note:
F4 is a digital input. Alarms
5-8 are enabled when relay
expansion module is
installed.
▲
Total overflow
indicator
M
Flashing: Manual control of
flashing relays. M flashing
alone indicates manual
analog output. Indicators
flash every 10 seconds.
 Press the Menu button to enter or exit the Programming Mode at
any time.
 Press the Right arrow button to move to the next digit during digit
or decimal point programming.
 Press or hold the Up arrow button to scroll through the menus,
decimal point, or to increment the value of a digit.
 Press the Enter button to access a menu or to accept a setting.
 Press and hold the Menu button for three seconds to access the
advanced features of the meter.