Use Manual

Troubleshooting
ENGLISH
! !15
Possible Cause
Possible Solution
No video output
Lack of power
Check power supplies of transmitter and
receiver and ensure that all cables are
connected correctly and that there is sufficient
power
Antennas
Ensure antennas are not damaged and are
firmly connected
Video connection cable
Examine the transmitter’s “Video” LED display.
If the LED is dark, check the HDMI or SDI
connection cable
Frequency selection
Ensure that the transmitter and receiver are set
to the same channel
Unsupported video
Check your selected video format agains the
format
product’s technical specifications
Inadequate
Connections
Check to ensure that all SDI or HDMI cables are
video quality
firmly connected
Range is too great or
Check how many “RSSI” LEDs are lit on the
signal is obstructed
receiver. For decent quality, at least 2-3 LEDS
should be lit. If only one is lit, the signal is weak
and the distance between transmitter and
receiver should be reduced. Alternatively,
obstacles between the devices should be
removed or another channel selected
Radio signal is
Wait one minute then restart transmitter and
experiencing
receiver or change the frequency channel
interference