960H Vandal Dome Camera DWC-V562D DWC-V562DIR User Manual ABOUT MANUAL Value Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
PRECAUTIONS Do not open or modify. Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages. Do not put objects into the unit. Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or other damages. Be careful when handling the unit. To prevent damages, do not drop the camera or subject it to shock or vibration. Do not install near electric or magnetic fields. Protect from humidity and dust.
Table of Contents Introduction Installation Camera OSD Menu and Glossary Troubleshooting Features 4 Parts and Descriptions 5 Dimensions 6 Included Accessories 7 Base Installation 8 Connecting to Monitors 9 Adjusting the Camera 10 Adjusting the 3-Axis Gimbal 11 12-23 24 Warranty Information 25-26 Specifications 27-28 3
FEATURES* DWC-V562D / DWC-V562DIR 1/3” 960H High Resolution CCD 700 TV Lines 2.
PARTS & DESCRIPTIONS* 1 2 3 2 10 Power Input Connector 12VDC/24VAC Dual Voltage 3 Video Output Connector - BNC 4 Upper Case 5 Dome Cover 6 Dome Cover Rubber 7 Mounting Plate 8 Upper Ring 9 Assembly Screws 11 12 Lens 13 1 NO IR IR 14 8 7 4 5 10 Camera Base 11 Control Board 12 Joystick 13 Power Board 14 Mounting Screws 6 9 5
DIMENSIONS IN MILLIMETERS (INCHES)* See below for diagrams of the exact dimensions for Surface Mount Housing. 37.0 (1.46”) 96.2(3.79”) 52.2(2.05”) 3- Ø 4.5 (3- Ø 0.18”) Ø149.9(Ø5.9”) 6 Ø149.9 (Ø5.9”) Ø115.0 (Ø4.53”) Ø5.0 (Ø0.
INSTALLATION* Included with Value Line Vandal Dome Camera 1. User Manual 2. Mounting Template 3. Second Video Jack 4. Three (3) Screws and Three (3) Dry Wall Anchors 5. L-Wrench 2 1 3 4 Ø5.0 Mounting Template Ø15.0 5 Ø144.
BASE INSTALLATION* 1. Pull wires through and make connections. Refer to page 9. Use mounting template to mount camera with dry wall mounts and wood screws. 2. Adjust the camera’s 3-Axis Gimbal, zoom, and focus. See pages 10-11 for details. 3. Use the joystick to adjust the OSD menu. See pages 12~23 for details. 4. Secure the dome cover to the camera base by using the assembly screws. Make sure the camera is tightly secured to avoid damage to the camera module.
CONNECTING TO MONITORS* 12VDC/24VAC CCTV Monitor IR NO IR Right Up Down Left 2nd Video Output Monitor 11.8in Power connection - 12VDC/24VAC Dual Voltage. (Auto polarity detection and protection.) All cameras are equipped with a second video output on the camera’s Control Board for easy on-site configuration.
ADJUSTING THE CAMERA* ZOOM FOCUS IR 1 2 3 4 Zoom: Tele Focus: Far - Wide Near NO IR Loosen the zoom and focus handles by rotating them counter-clockwise. Adjust the field of view by moving the handle to the RIGHT (tele) to zoom in, or to the LEFT (wide) to zoom out. Adjust the focus the same way as described above AFTER the desired zoom position is established. Once the desired adjustments have been made, please tighten the handles back by turning them clockwise.
ADJUSTING THE 3-AXIS GIMBAL* The Gimbal mechanism yields maximum rotation and placement as shown below.
MODULE OSD MENU* EXPOSURE COLOR DAY NIGHT LENS WB MODE DAY & NIGHT BACKLIGHT RED GAIN NIGHT C. BLUE GAIN NIGHT A. COLOR MODE EXIT JUMP MANUAL, DC OFF / BLC / HME /D-WDR AGC OFF / LOW / MID / HIGH / HIGHEST 2D-DNR OFF / LOW / MIDDLE / HIGH EXIT JUMP SAVE & EXIT / EXIT AWC / ATW / MANUAL / PUSH 0~255 0~255 NORMAL / COOL / WARM EXIT JUMP AUTO / COLOR / B&W 0~100 0~100 SAVE & EXIT / EXIT SAVE & EXIT / EXIT FUNCTION MOTION PRIVACY MASK1 MIRROR AREA SET SHARPNESS SENSITIV.
EXPOSURE LENS MANUAL MANUAL mode supports the fixed board lens or the manual iris lens. DC DC mode supports the auto-iris varifocal lens. Note: Both MANUAL and DC mode have FOCUS TARGET. You can adjust the focus by finding the highest number on the FOCUS TARGET. See page 10 for Focus information. ELC levels and DC levels are adjustable. The higher number, the brighter the image. E. Shutter sets the shutter speed levels from 1/60 to 1/100000.
EXPOSURE BACKLIGHT OFF BLC BACKLIGHT COMPENSATION Select MANUAL or SMART. SMART is recommended. If MANUAL is selected, you can adjust the BLC levels in four areas of the scene (Top, Bottom, Left, Right). Increase the BLC levels to make the image brighter. If SMART is selected, the camera will automatically adjust the BLC zone. BLC levels to choose from include: LOWEST, LOW, MID, HIGH. HME HIGHLIGHT MASKING EXPOSURE HME masks highlights to allow objects to appear clearly on the screen.
EXPOSURE AGC (Auto Gain Control) OFF/ LOW / MID / HIGH / HIGHEST 2D-DNR (Digital Noise Reduction) OFF/ LOW / MIDDLE / HIGH EXIT_JUMP SAVE & EXIT EXIT AGC enhances the picture brightness in low light conditions. A higher level AGC setting makes the images brighter; however, it could increase the amount of noise. 2D-DNR reduces the noise on the screen in low light conditions and allows for clearer images, even at night. Exit the OSD after saving the current settings. Exit the OSD without saving.
COLOR WB MODE AWC ATW MANUAL PUSH RED GAIN 0~255 BLUE GAIN 0~255 COLOR MODE NORMAL COOL WARM EXIT_JUMP SAVE & EXIT EXIT 16 Auto White Balance Control mode compensates for color temperature changes between 2000K and 18000K. Auto Tracking White Balance Control mode compensates for color temperature changes between 2500K and 9500K. Users can control the white balance manually by changing RED GAIN and BLUE GAIN (see below). Push Lock fixes the white balance based on current lighting.
DAY & NIGHT D&N MODE AUTO COLOR B&W Camera switches between day and night automatically depending on light level. Camera will stay in color mode when there is enough light. Camera will switch to B&W at night or other low light environments. Camera always stays in day/color mode. Camera always stays in night mode. If AUTO is selected, please define the following settings: ▪ BURST: ON/OFF. If ON is selected, the camera provides a color burst signal in ▪ night mode.
FUNCTION MIRROR OFF MIRROR Flips the image horizontally. SHARPNESS 0~30 Sets the image sharpness. The higher the number, the sharper the image. GAMMA 0.45/ 0.6/ 1.0 Controls the output signal level. The higher the setting, the darker the dark colors will be. / MANUAL 0.45 is default. SLC (Side Light Compensation) OFF/ ON NIGHT-UP OFF/ ON EXIT_JUMP SAVE & EXIT EXIT 18 Increases brightness on sides of the image. Adjusts sensitivity in low light conditions by set-up level.
MOTION The camera can detect the movement and display an alarm on the screen when movement is detected. AREA SET AREA 1,2,3,4 OFF/ON If ON, motion areas can be selected and moved accordingly. Select Areas 1-4 and adjust using controls for TOP, BOTTOM, LEFT, or RIGHT. SENSITIV. Sensitivity level of the motion detection is adjustable. Motion detection will be more sensitive at a higher number. SHOW INDI. Set the Show Indicator to OFF, ICON, or TRACE.
PRIVACY You can hide some parts of the screen for privacy masking. A total of 8 different privacy masking zones are available. MASK 1~ MASK 8 OFF / ON Select ON or OFF for each mask (MASKS 1-8). If ON is selected, you can set the area to be masked and the shape and color of the mask. ▪ START POINT: Select the START POINT to adjust the size of the privacy zone.
SET-UP TITLE OFF ON If ON is selected, you can display the camera title on the screen. *CLR: Clear the title. *POS: Position the title on the screen. DPC (Dead Pixel Cancellation) OFF AUTO Dead Pixel Cancellation automatically removes defective pixels in real time. If AUTO is selected, you can define the following: *WHITE THR.: Cancels the white defective pixels. *BLACK THR.: Cancels the black defective pixels. *DPC LEVEL: Adjusts the sensitivity level of the dead pixel cancellation.
SET-UP MONITOR MODE 1 / MODE 2 MODE 1 is the default. If the displayed image is not good enough, try MODE 2. LANGUAGE Total of 10 different languages are supported - ENGLISH, MANDARIN (CHINESE 1), CANTONESE (CHINESE 2), JAPANESE, DEUTCH, FRENCH, ITALIAN, RUSSIAN, SPANISH, AND DUTCH. OSD COLOR Total of 8 different OSD Menu Color available - BLUE, GREEN, CYAN, RED, MAGENTA, YELLOW, PURPLE and GRAY. COMMUNICATION OFF / ON If ON is selected, you can define the following: *PROTOCOL: PELCO-D only.
EXIT EXIT SAVE & EXIT EXIT Exit the OSD after saving the current settings. Exit the OSD without saving.
TROUBLESHOOTING Before sending your camera for repair, check the following or contact one of our technical specialists. No VIDEO Check the coaxial cable and make sure it is connected securely. Check the lens’ iris adjustment on the menu setup of the camera. Check the power supply and make sure the camera has the proper voltage and current. Out-of-Focus VIDEO Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean. Check the lens manual focal and zoom adjustment.
WARRANTY INFORMATION* Digital Watchdog (referred to as “the Warrantor”) warrants the Digital Watchdog Camera against defects in materials or workmanship as follows: LABOR : For the initial two (2) years and one (1) year on IR LED from the original purchase date, if the camera is determined to be defective, the Warrantor will repair or replace the unit with a new or refurbished product at its option at no charge.
LIMITS AND EXCLUSIONS* There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages (including without limitation or damage to recording media), resulting from the use of these products or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.
SPECIFICATIONS* VIDEO Image Sensor 960H Sharp CCD Total Pixels 1020 (H) x 507 (V), 520K Pixels Scanning System 2 : 1 Interlace Frequency Synchronization 15.734KHz (H), 59.95Hz (V) Internal Horizontal Resolution 650 TV Lines [Color], 700 TV Lines [B/W] Minimum Illumination F1.2 (30IRE): 0.3 Lux [Color] F1.2 (30IRE): 0.0 Lux [B/W] 52dB (AGC off) CVBS: 1.0Vp-p / 75 Ω S/N Ratio Video Output LENS Focal Length Lens Type 2.
OPERATIONAL Sharpness Gamma 0-30 MANUAL, 0.45, 0.60, 1.
MEMO
MEMO
MEMO
5436 W. Crenshaw St. Tampa, FL 33634 Tel : 866-446-3595 Fax : 813-888-9262 www.Digital-Watchdog.com technicalsupport@dwcc.
