PIXIM Micro Dome Camera DWC-MC355T ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
PRECAUTIONS Do not open or modify. Do not open the case except during maintenence and installation, for it may be dangerous and can cause damages. Do not put objects into the unit. Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or other damages. Be careful when handling the unit. To prevent damages, do not drop the camera or subject it to shock or vibration. Do not install near electric or magnetic fields. Protect from humidity and dust.
TABLE OF CONTENTS Introduction Features Parts and Descriptions Dimensions Installation Inside the Box 4 5 6 7 Mount Installation Instructions 8-9 10 11 Connecting to Monitors Adjusting the Camera’s Position Troubleshooting 12 Warranty Information 13-14 Specifications 15 3
FEATURES* 1/3” PIXIM Seawolf CMOS Sensor 480TV Lines [Color], 520TV Lines [B/W] 3.6mm Fixed Iris Lens Low Power Consumption (Max 0.7W) TDN (True Day/Nigh with IR Cut Filter) Enhanced Sensitivity 0.4 Lux F1.
PARTS & DESCRIPTION* 1 2 Lens Power Input Connector 8 7 12VDC Voltage 3 4 5 6 7 8 Primary Video BNC Output Connector Mounting Screws Camera Module Bubble Dome Upper Case Security Screw 6 4 1 5 3 2 5
DIMENSIONS IN MILLIMETERS (IN)* 6
INSIDE THE BOX* Included with Micor Indoor Dome Camera 1 2 3 User Manual Mounting Template 4 Machine Screw and 4 Dry Wall Anchors 4 5 Miniature L-Key for Security Screw L-Key Micro Dome Camera DWC-MC352 DWC-MC352-29 DWC-MC352DIR ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
INSTALLATION* 1 4 8 2 1. Remove the Security Screw from the Upper Case using the small L-Key. 2. Unscrew the upper case from the camera module by rotating it counter clock-wise. 3. Use the camera’s mounting template or your camera to mark the holes as required. Drill into the drywall and insert the drywall mounts into the holes. 4. Pull wires through and make connections. (See page 10 for more information). Mount the camera to the wall using the included machine screws.
INSTALLATION* 5 5. Adjust the camera’s view (See page 11CAMERA SETTINGS). 6. place the bubble dome on the camera. Screw the cover dome back by rotating it clock-wise. 7. Tighten the Security screw back in place to firmly secure the cover dome to the camera module.
CONNECTIONS* Use the diagram below to connect the camera to a Monitor or CRT Monitor properly. 12VDC VIDEO OUT CAUTION : Check for polarity when using a DC 12V.
L ENS ADJUSTMENTS* Adjust the camera’s pan (360º) and tilt (70º) position.
TROUBLESHOOTING Before sending your camera for repair, check the following or contact our technical specialist. FOR NO VIDEO Check the coaxial cable and make sure it is connected securely. Check the lens’ iris adjustment at the camera’s OSD menu. Check the power supply and make sure the camera has the proper voltage and current. FOR OUT-OF-FOCUS VIDEO Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean. Check the lens’ manual focal and zoom adjustment.
WARRANTY INFORMATION* Digital Watchdog (referred to as “the Warrantor”) warrants Camera Series against defects in materials or workmanship as follows. LABOR : For the initial five (5) years and one (1) year on LED from the date of original purchase, if the camera is determined to be defective, the Warrantor will repair or replace the unit, with new or refurbished product at its option, at no charge.
LIMITS AND EXCLUSIONS* There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages (including without limitation and damage to recording media) resulting from the use of these products, or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.
SPECIFICATIONS* VIDEO Image Sensor 1/3" PIXIM Seawolf CMOS Total Pixels 742 (H) x 552 (V), Effective Pixels 720 (H) x 540 (V) Lens Frequency Video Output 3.6mm Fixed Iris Lens 15.734KHz (H), 59.95Hz (V) VBS 1.0Vp-P (75 Load) Horizontal Resolution 480TV Lines [Color], 520TV Lines [B/W] Minimum Illumination S/N Ratio Video Output ENVIRONMENTAL F1.2 (30IRE): 0.08 Lux [Color] F1.2 (30IRE): 0.01 Lux [B&W] 45dB CVBS: 1.
5436 W Crenshaw St. Tampa, FL 33634 Tel : 866-446-3595 / 813-888-9555 Fax : 813-888-9262 www.Digital-Watchdog.com technicalsupport@dwcc.
