User manual

CONNECTIONS AND LENS ADJUSTMENTS
*
■
CONNECTIONS
■
LENS ADJUSTMENTS
CAUTION
Check for polarity when using a DC 12V power supply.
With LED Type Without LED Type
Adjust the pan(360˚)
and tilt(62˚) position.
※
MC352,MC352-29
C AMERA SETTING AND I NSTALLATION
*
Camera Position Adjustment :
(1)Loosen the SCREW(B) on the UPPER
CASE(C), using the L-WRENCH(A).
(2)Separate BOTTOM CASE(E) from
UPPER CASE(C) by turning UPPER
CASE(C) to the right.
(3) Separate CLEAR DOME(D) from
BOTTOM CASE(E).
(4) Adjust the camera gimbal in
BOTTOM CASE(E).
(5)Assemble CLEAR DOME(D) and
UPPER CASE(C) with BOTTOM CASE(E)
(6) Tighten the SCREW(B) on the UPPER
CASE(C), using the L-WRENCH(A).
Adjust the pan(360˚)
and tilt(41˚) position.
※
MC352DIR
1 Remove 1 STOP SCREW(B) on UPPER CASE(C),
using the L-WRENCH(A).
2 Separate UPPER CASE(C) from BOTTOM CASE(E).
3 Make the 4 mounting screw hole on the ceiling
/wall. The holes of BOTTOM CASE(E) can help
to make the correct hole location.
4 Put POWER CABLE(F) and VIDEO CABLE(G) into
the ceiling/wall.
5 Fix the BOTTOM CASE(E) onto the ceiling/wall
by using the SCREWS(D).
6 Camera Adjustment and Setting.
(Referance - “CAMERA SETTING” )
7 Connect UPPER CASE(C) and BOTTOM CASE(E).
8 Tighten the STOP SCREWS(B) onto the
UPPER CASE(C), using the L-WRENCH(A).
A
B
C
D
E
F
G
A
B
C
D
E
DC 12V
VIDEO OUT
41°
62.0°
54