Installation manual

Appendix
23
A.1. Technical Specifications
Video Input Channels
Number of Intelligent Video
Analysis Channels
1
Analog Video Inputs
TV Standard
Composite 1Vp-p (NTSC or PAL)
Physical Connector
1 x BNC 75Ω
Analog Video Outputs
TV Standard
Composite 1V p-p (NTSC or PAL)
Physical Connector
1 x BNC 75Ω
Digital Video Output
IP Video Streaming
MPEG 4 SP and MJPEG
Maximum Resolution
per Channel
Channel 1: 4CIF
Channel 2: CIF
Frame Rate (MPEG 4 SP)
Up to full frame rate
Bit Rate
CBR (128Kbps – 4Mbps), VBR
Streaming Settings
Two separate, independent and configurable video streams
Audio Input/Output
Physical Connector
1 x 3.5mm plug
Network
Ethernet
(IEEE 802.3/802.3u)
1 x RJ-45 interface
Services and Protocols
TCP/IP, UDP/IP, HTTP, SMTP, DHCP, DNS, SNTP
Video Streaming
RTP/RTSP
Commands
TCP/IP, HTTP
I/O Interface
Serial (may use one
interface per input channel
for PTZ camera control)
1 x RS485
In – Alarm Input
1 x dry contact
Out – Relay Output
1 x relay output (rated load 0.3A @ 125VAC, 1A @ 30VDC)
Power Source
Voltage
12VDC; 24VAC, 50/60Hz
PoE Injector Output Voltage
48VDC, 0.4A
Power Consumption
7W