Installation manual

IOI-XTRK-10D Installation Manual
14
5.1.1 Connecting the Camera to the Encoder
The System Cable supplied with the CP-2202-361P/N PTZ camera connects the IOI-XTRK-10D
encoder to the camera’s video output and RS485 control line.
The following illustration shows the System Cable:
Figure 6 - System Cable
Connecting the Video Output of the Camera to the Encoder 5.1.1.1
To connect the video output of the PTZ camera to the encoder
 Attach one end of a 75Ω coaxial cable with female BNC connectors (not supplied by DVTEL)
to the VIDEO IN connector on the IOI-XTRK-10D.
Note:
The cable length may not exceed 30 meters (98 feet) in length. For more
information on video cable specifications, see Video Cable (page 9).
 Attach the other end to the male BNC connector on the System Cable.
Note:
You must connect the RS485 control lines of the PTZ camera in order to use the
camera’s pan, tilt, and zoom functions.