Installation manual

trk1 Installation Manual
20
3. On the Solo Setup control keypad, click Start Recording to record a view in the camera’s
field of view.
4. Select a folder where to store the clip. Recording starts when the folder is selected.
5. Walk through various locations across the vertical axis of the camera’s field of view in order to
place ground and height markers and guidelines in the clip.
6. Press Stop Recording .
7. Proceed to the tab for Step 1: Ground & Height.
Note:
For detailed instructions how to set markers and guidelines, follow instructions in the
HTML Edition Units User’s Guide.
8. Click Browse to load the clip from the folder where it is saved.
9. Use the Play , Pause , Fast Forward , and Rewind buttons on the Solo Setup
keypad to explore the clip. The status of the view is displayed on the bottom left side of the
screen.
10. Exit Clip mode and return to Live mode by pressing the round Play button on the control
panel located to the left of the monitor.
The caption under the monitor changes from Clip to Live.
11. Repeat steps 3-9 above for each preset.
12. Proceed to the tabs for Steps 2-4 of the Depth Setup to complete the setup and apply settings.