Manualshelf

Installation manual

ManualsBrandsDVTEL ManualsMedia Converterioimage trk1
11121314151617181920
Installing and Connecting the Unit
7
3. Fasten each unit using the nuts and washers removed in step 1, making sure to first place the
washer on each video connector before tightening the nut on the video connector.
Figure 7: Unit Secured to Rack Mount Panel
4. Repeat steps 1 through 3 for each of the units you want to assemble on the rack mount panel
(up to 8 units can be assembled per panel).
5. The following is an example of the rack mount assembly holding eight units.
Figure 8: Rack Mount Assembly with Eight Units
6. Attach the rack mount panel to a 19" rack.