Installation manual

trk1 Installation Manual
4
The video connection panel of the unit includes the following items:
Item
Description
Video In
(BNC)
Input interface for receiving the surveillance camera analog video signal (source) for
analysis and detection.
Video Out
(BNC)
Output interface that provides the PAL or NTSC analog video signal after analysis
and includes detection overlays and additional On-Screen Display (OSD)
information.
Typically connected to analog video equipment such as analog video displays or an
analog video recording device or a digital video recorder (DVR).
Note:
In order to view analog video, analog video out must be enabled in the
unit settings (disabled by default). For more information on how to
enable the analog video out signal, refer to the HTML Edition Units
User’s Guide.
Reset Button
For resetting the unit to its previous settings.