Installation guide

Quasar CP-3211/CP-4221 User and Installation Guide
64
UPnP Settings
 Enable UPnP – If UPnP is enabled and a camera is discovered on the LAN, the icon of the
connected camera appears in My Network Places, allowing direct access, as seen below.
Figure 45: Direct Access to Camera with UPnP Enabled
Note:
enable this function, make sure the UPnP component is installed on your To
and Windows 8 for the Windows 7 Install UPnP Components computer. Refer to
procedure.
 Enable UPnP port forwarding – When UPnP port forwarding is enabled, the camera is
allowed to open the web server port on the router automatically.
Note:
To enable this function, make sure that your router supports UPnP and that it is
activated.
 Friendly name – Set the name for the camera for identification.
Click Save to save the settings.