Installation guide

Quasar CP-3211/CP-4221 User and Installation Guide
54
To create a self-signed certificate:
Before a CA-issued certificate is obtained, users can first create and install a self-signed certificate.
1. On the HTTPS page, click Create under Create self-signed certificate.
2. Provide the requested information to install a self-signed certificate for the camera. Refer to
Provide the Certificate Information in this section for details.
Figure 34: HTTPS Screen – Create Self-Signed Certificate
To create a certificate request:
1. Click Create Certificate Request to create and submit a certificate request in order to obtain a
signed certificate from a CA.
2. Provide the requested information in the Created Request field. Refer to Provide the
Certificate Information in this section for details.
3. When the request is complete, the subject of the Created Request is shown in the field. Click
Properties below the Subject field, copy the PEM-formatted request and send it to your CA.
Figure 35: HTTPS Screen – Install Signed Certificate